Skip to content
Free shipping in USA and Canada over $99 USD
Free shipping in USA and Canada over $99 USD

Fulcrum Speed 40C Front - Speed 55C Rear Clincher Wheelset

by Fulcrum
Sold out
Original price $3,095 USD - Original price $3,095 USD
Original price
$3,095 USD
$3,095 USD - $3,095 USD
Current price $3,095 USD
Availability:
Out of stock

Usually shipped within 24 hours

Title: Shimano / Wheelset / Clincher / 700c

Fulcrum Speed 40C Front - Speed 55C Rear Clincher Wheelset.

ABOUT PRODUT:        

Every cyclist has their own preferences once on the saddle, different situations may call for a different bike set up. A side wind, frequent changes in pace, winding yet fast routes…
Devised for more expert, demanding cyclists accustomed to fast cycling and careful about the details on their bikes, the SPEED range already offers an adequate choice with two different depth rims: 40 mm or 55 mm. Medium – low or medium - high. 

From here, we have spoken with the pros on our teams, who have often chosen to combine the two sizes depending on the race route. We then went back to thinking about the different possible situations on the road and we were naturally led to imagine a third possibility: the union of the pluses offered by these two versions when necessary.  

And the outcome was “Combo”, 40 mm at the front, 55 mm at the back, an additional option for the full carbon range. It will be available in tubular “T” and clincher “C” versions.  Maximum stiffness and transfer of power at the back, improved steering and agility at the front. The perfect mix? The road will decide.

    MAIN FEATURES:

    RDB™ RIM DYNAMIC BALANCE

    The concept is simple and elegant: balance the weight of the gasket, with an item of similar weight placed on the exact opposite side

    USB™ - CERAMIC ULTRA SMOOTH BEARINGS™

    Fulcrum® has a long-standing reputation for the extremely high performance of its hubs in terms of smoothness and reliability.
    In fact, all the projects are entirely developed in our R&D department and we have put obsessive care into taking care of every detail.
    The hubs with USB™ ceramic bearings (Ultra Smooth Bearings) further enhance the triathlon and road bike wheels’ smoothness and reduce weight and the need for maintenance.

    2:1 TWO-TO-ONE™

    When you push on the pedals, the rotational force on the sprocket induces a slackening of the freewheel spokes with a consequent loss of rim tension.
    This results in undesirable flex of the whole wheel and an unavoidable loss of energy. Fulcrum® has solved this classic cycling problem with its 2:1 Two-to-One™ Spoke Ratio patent, by doubling the spokes in the critical zones.

    DRSC™ - DIRECTIONATED RIM-SPOKE COUPLING

    Exclusive rim/spoke coupling system. It allows the rim, spokes, nipples and hub to align properly with the same tensioning value in all areas.

    MOMAG™

    What is MoMag™?
    A magnet and lots of ingenuity. This was what led to the patent for the well-tested “Mounting Magnet” system, or MoMag™.

    F.I.C. FULCRUM IDENTIFICATION CARD - 100% HANDMADE QUALITY 

    Right from its inception Fulcrum® has been marked by feature that continues to this day: that is to design, prototype and industrialise all the wheels characterised by the red “F”.
    Indeed these take shape inside of the R&D, the leading-edge department that represents the beating heart of the Italian company.
    Every single component of the wheel, the materials chosen and the technologies applied are the tangible result of the effort that Fulcrum® makes every day to give you maximum performance and reliability.

    TRACEABILITY

    A guarantee of quality

    The keyword for our products is: traceable.

    If you find a little label attached to any Fulcrum® product, do not remove it. It will provide you a guarantee in case of an ascertained defectiveness of a production batch, and so the component needed or wheel will be traceable.

    All this because, devoted to its mission, Fulcrum® demands the absolute perfection and safety for its customers.

    RIM FULL CARBON TECHNOLOGY

    Full carbon Fulcrum® rims are built using combinations, developed in the laboratory, of different types of fibre, including UD and the famous 90-degree 3K of models at the top of our range.
    To build them we developed a special HTG (high transition grade) resin, whose glass transition point is at a higher temperature than any other fibre used in the bicycle industry.
    This gives incomparable performance when braking.

    UNDRILLED RIM BED

    No holes on the bridge connector means that the rim is uniform at every point, free from critical areas subject to stress.
    The advantages are immediately clear: less weight, longer lasting rims, greater resistance to fatigue, the possibility of giving the spokes more tension and more stiffness which, in terms of performance, means improved responsiveness and acceleration.

    DIFFERENTIATED RIM HEIGHT

    Two different heights for front and back. A bigger challenge in construction, but necessary to achieve the very best.
    The lower front wheel improves handling, limiting weight to a maximum and also mass involved when turning and relaunching.
    The rear rim is higher and more solid, to transmit all the power to the wheel and increase stability.

    CARBON HUBS

    In line with their aim to save every possible gram of weight and to choose the most advanced technological solutions, the R&D department has developed a seamless carbon hub.
    The fibre selected is woven at 90 degrees, for enhanced balance of torque when pedalling.

    OVERSIZE FLANGE

    The Oversize Flange was developed from the need to create a system to transmit every watt to the ground without dispersion, stiffening the wheel system where necessary, without having to add spokes or superstructures that increase weight.
    The oversize flange uses physics to solve the problem. It increases dishing and enables spokes to be shortened. Doubling the spokes creates a balanced system that is excellent at transmitting torque.

    AC3™ - ALL CONDITIONS CARBON CONTROL

    AC3™ - ALL CONDITIONS CARBON CONTROL

    For years, the issue of braking on carbon rims has been studied and technically updated, in accordance with progress made in research into materials and available finishing processes.

    AC3™ is a further step forward in this direction and it will enable surprising braking performance, especially in difficult conditions, when improvements become the base for a different way of cycling.

    The Fulcrum R&D division has chosen to change its approach to braking track production, going from a mechanical process to one that uses micro laser incisions on the surface to eliminate resins and perfect roughness.

    In this way, braking directly exploits the brake pad’s contact on the fiber, improving grip and dissipation of water and moisture from the surface, allowing it to work immediately in ideal conditions and give better results.

    Confidence and power grow, together with excellent modularity. Lab tests have shown that this greater force enables a 6% improvement in braking power in dry conditions compared to previously. In the wet, the difference is amazing: here there is a 43% increase, bringing braking distance close to those in dry conditions.

    The cyclist can concentrate totally on choosing the best line, with no slip-ups, each hairpin a work of art.

    • TYRE TYPE Clincher
    • TYRE SIZE 28"
    • DISCIPLINE Road / Triathlon
    • ASTM CATEGORY 1
    • WEIGHT 1450 g
    • RIM MATERIAL Carbon
    • RIM MATERIAL DETAILS Full carbon, "Twill" - carbon fiber finishing
    • PROFILE HEIGHT Medium / High
    • RIM HEIGHT Front: 40 mm - Rear: 55 mm
    • RIM WIDTH 24,2 mm
    • INNER RIM WIDTH (CHANNEL) ETRTO 17C
    • TYRE WIDTH From 25 mm to 50 mm
    • BRAKING SYSTEM Caliper
    • BRAKING SURFACE/BRAKES OPTIONS "Twill" carbon fiber braking surface. AC3 treatment on braking surface
    • FRONT AXLE COMPATIBILITY QR
    • REAR AXLE COMPATIBILITY QR
    • FRONT WHEEL SPOKES 18 (9 left - 9 right)
    • REAR WHEEL SPOKES 21, Two-to-one (7 left - 14 right)
    • SPOKES: MATERIAL Stainless steel, double butted
    • SPOKES: PROFILE Aero, straight pull
    • NIPPLES Aluminum
    • FRONT HUB Carbon, Aluminum flanges
    • REAR HUB Aluminum, Aluminum oversize flange
    • BEARINGS USB ceramic bearings. Adjustable Cup & Cones bearing system
    • OTHERS Plasma treated HG freewheel. Aluminum Axle
    • WEIGHT LIMIT 109 kg (Cyclist)
    • FWB OPTIONS HG11, Campy

          All our products are professionally packed and shipped with tracking number and insurance. Lafo Bikes is offering you high end bikes, frames, parts & accessories that we love.  We are selling only genuine products, no copy or replica. Our goal is to offer you the best price on amazing bikes

          High End Bike Discount Safe Checkout

          All orders are processed within 2 business day (excluding weekends and holidays). You will receive another notification when your order has shipped. Items are shipped from our Canada or USA facilities, based on stock availability and your location.

          We offer two shipping options to get you what you need, when you need it.
          Expected delivery times for North America are listed below:

          Standard | 4-8 business days

          Expedited | 2-3 business days

          We also ship internationally! Please refer to our FAQ for further details.

          Enjoy shopping with our 30 day money-back guarantee!

          In the unfortunate event that you want to return an item, please contact our customer service department within thirty (30) days of receiving your items at support@lafobikes.com. Don’t hesitate to call us if you’re wondering if an item can be returned. We’ll gladly answer all your questions.

          You can find our full return policy here.